NON FERROUS METALS
Rustproof Brass, Copper, Bronzes, Lead & Tin Non-Ferrous Metal Alloys & Industrial Products
.jpeg)
100% Rustproof (Zero Iron)
Exceptional Corrosion Protection
High Electrical & Thermal Conductivity
Non-Magnetic & Non-Sparking
Superior Ductility & Machinability
Ready Stock
NON FERROUS METALS SUPPLIER IN MUMBAI
Non-ferrous metals are used in countless manufacturing applications. You can find them in airplane fuselages as well as automotive engines, fasteners, wiring kits, building roofs, pipes and more. Unlike ferrous metals, non-ferrous metals do not contain any meaningful amount of iron. They are characterized by the presence of little or no iron. And without any meaningful amount of iron, non-ferrous metals offer several benefits.
Non-ferrous metals are rustproof. They can still corrode, but they can’t rust. Rusting is the result of iron being exposed to oxygen. When iron is exposed to oxygen, it converts to a new compound known as rust oxide, which is simply rust. Rusting, however, is exclusive to iron. Only iron, as well as iron alloys, can rust. Since non-ferrous metals contain little or no iron, they are protected from this phenomenon.
ROUND BARS
SQUARE BARS
HEX BARS
FLAT BARS
PLATES & SHEETS
NON FERROUS METALS CLASSIFICATION
CATEGORIES OF NON FERROUS METALS
Non-ferrous metals are categorized by primary metal base into Copper & Brass Alloys, Heavy Engineering Bronzes, and Heavy Metal Ingots & Specialty Sheets.
COPPER & BRASS ALLOYS
- Products: Brass, Copper
- Superior Electrical & Thermal Conductivity
- High Ductility, Formability & Machinability
- Wiring Kits, Busbars, Plumbing Pipes & Fasteners
HEAVY ENGINEERING BRONZES
- Products: Phosphor Bronze, Aluminium Bronze
- High Wear Resistance & Low Coefficient of Friction
- High Seawater Corrosion Resistance & Load Capacity
- Bearings, Bushings, Worm Gears & Marine Propellers
HEAVY METAL INGOTS & SPECIALTY SHEETS
- Products: Lead Ingots, Tin Sheets
- High Density Radiation Shielding & Chemical Protection
- Excellent Malleability & Low Melting Point
- Battery Manufacture, Chemical Tank Linings & Soft Solder
INDUSTRIAL ADAPTABILITY
APPLICATIONS OF NON FERROUS METALS
Non-ferrous metals power aerospace fuselages, electrical power grids, marine engineering, automotive engines, and chemical plants worldwide.
AIRPLANE FUSELAGES & AEROSPACE
AUTOMOTIVE ENGINES & WIRING KITS
ELECTRICAL BUSBARS & CONNECTORS
MARINE PROPELLERS & PUMP SHAFTS
BUILDING ROOFS, PLUMBING & PIPES
HEAVY DUTY BEARINGS & BUSHINGS
RADIATION SHIELDING & BATTERIES
CHEMICAL ACID TANKS & LININGS
GRADE FINDER
NON FERROUS METAL PRODUCTS AVAILABLE
Use the options below to filter by metal type, search specific non-ferrous products, and request quick rates.
DATA SHEET
TECHNICAL INFORMATION
Detailed metallurgical specifications, chemical compositions, physical properties, and available sizes of our non-ferrous metal products.
Typical elemental compositions of prominent Non-Ferrous Metal products supplied by Steel Mart:
| Material / Grade | Primary Base Metal | Key Alloying Elements | Iron (Fe) Content | Key Characteristic |
|---|---|---|---|---|
| Brass | Copper (60 – 70%) | Zinc (30 – 40%), Lead (opt) | < 0.1 % (Trace) | High Machinability & Aesthetic Finish |
| Pure Copper | Copper (> 99.9%) | Trace Oxygen / Deoxidized | Nil / Trace | Exceptional Electrical Conductivity |
| Phosphor Bronze | Copper (Balance) | Tin (5 – 10%), Phosphorus (0.01 – 0.35%) | Nil | High Wear Strength & Low Friction |
| Aluminium Bronze | Copper (Balance) | Aluminium (9 – 12%), Iron/Nickel (opt) | 1 – 5 % (Strengthening) | Extreme Marine Seawater Corrosion Strength |
| Lead Ingots | Lead (> 99.97%) | Trace Antimony / Bismuth | Nil | Ultra-High Density Radiation Shielding |
| Tin Sheets | Tin (> 99.9%) | Pure Refined Tin | Nil | Non-Toxic Corrosion Barrier & Solder Base |
| Material | Density (g/cm³) | Electrical Conductivity (% IACS) | Tensile Strength (MPa) | Rust Resistance |
|---|---|---|---|---|
| Copper | 8.96 | 100 % (Standard) | 220 – 380 | 100% Rustproof |
| Brass | 8.40 – 8.73 | 28 – 44 % | 340 – 550 | 100% Rustproof |
| Phosphor Bronze | 8.80 | 15 – 20 % | 400 – 650 | 100% Rustproof |
| Aluminium Bronze | 7.60 – 7.80 | 12 – 15 % | 600 – 850 | 100% Rustproof (Seawater Resistant) |
| Lead Ingots | 11.34 | 8 % | 15 – 20 | 100% Rustproof |
Round Bars & Hollow Bushes: 3 mm to 300 mm diameter in Brass, Copper, and Bronzes.
Square Bars: 6 mm to 100 mm A/F.
Hexagonal Bars: 6 mm to 85 mm A/F.
Flats, Strips & Busbars: Width 10 mm to 200 mm; Thickness 2 mm to 50 mm.
Sheets & Plates: Thickness 0.3 mm to 50 mm in Copper, Brass, and Tin sheets.
We supply Non-Ferrous Metal products in multiple finish conditions depending on application demands:
- Mill Finish / Extruded: Clean extruded bright condition for busbars, rods, and structural profiles.
- Bright Annealed & Polished: Smooth polished surface for architectural brass and electrical copper components.
- Refined Cast Ingots: Clean, dross-free lead ingots ready for battery smelting and radiation wall lining.
Key rustproof advantages of non-ferrous metals:
- Zero Iron Rusting: Because non-ferrous metals contain no iron, they cannot form iron oxide (rust).
- Protective Oxide Patina: Copper and brass develop a self-passivating protective patina when exposed to air, preventing internal deterioration.
- Marine & Chemical Immunity: Aluminium Bronze and Phosphor Bronze resist severe cavitation and seawater erosion.
Key industrial applications for non-ferrous metals:
- Aerospace & Automotive: Airplane fuselages, engine bearings, electrical wiring harnesses, radiator cores.
- Electrical & Industrial: High-voltage busbars, transformer connectors, heavy duty bronze bushes, battery plates, radiation shielding.
| Product / Metal | Indian Standard (IS) | American Standard (ASTM / UNS) | British / European (BS / EN) |
|---|---|---|---|
| Brass | IS 319 / IS 291 | ASTM B16 / C36000 | EN 12164 / CW614N |
| Copper | IS 191 / IS 1897 | ASTM B187 / C11000 | EN 13601 / CW004A |
| Phosphor Bronze | IS 28 | ASTM B139 / C51000 | EN 12163 / CW451K |
| Aluminium Bronze | IS 305 | ASTM B150 / C63000 | EN 12163 / CW307G |
STEEL MART ADVANTAGE
WHY CHOOSE STEEL MART
Over 40 years of engineering supply chain leadership in industrial non-ferrous metals stockholding.
40+ YEARS EXPERIENCE
Decades of metallurgical expertise providing premium metals and forgings since 1986.
READY STOCK
Huge warehouse inventory of standard configurations and diameters for immediate loading.
WORLDWIDE EXPORT
Trusted supplier shipping material batches across European, Middle Eastern, and Asian markets.
FAST DELIVERY
Optimized logistics networks ensuring secure and rapid material transit across India and globally.
NEED HELP SELECTING THE RIGHT NON FERROUS METAL PRODUCT?
Our metallurgical team is here to assist you in selecting the ideal non-ferrous metal, alloy composition, and size for your specific electrical, corrosion, or mechanical requirements.